With the SD tool change system the tool is adapted directly at the shank. For this the motor shaft has a clamping cone, in which with high power a collet is pulled.

The clamping power is produced by diaphragm springs. The opening of the clamping device effected via pneumatic short-stroke cylinder.

The different tools are at this changing system in an open station. This has the consequence that the unit can be very compactly built up.

The position of the different tools is likewise administered within the machine control as the integrated  length measuring switch. This tool changer can only be used on machines with servo control, e.g. ICV 4030.

The main spindle drives are also prepared for an automatic tool changing system with standard SK-20,SK30 or HSK25 tool holding fixtures.

For changing a pneumatic lifting cylinder works and releases there by the clamping cone. Depending on the machining range of the selected CNC machine, linear tool changing systems with 4,5,8 or 10 tool holding fixtures can be mounted.

Beyond that, all systems can be equipped with the new electronic controlled 10-times circular tool changer.

A fully protective cover ensures an optimal splinter protection of the tool holding fixtures.

Round Tool Changer