t.01727 810 270 (Head office)
t.01604 492 546 (Northampton office)
email: info@g-codetechnology.co.uk
T
he flat bed units with stepper or servo axis drive are low priced systems for machining front panels, signs, plastic, etc.The X/Y/Z units are built like modular systems multi-axis machining units with travel strokes up to 1250 x 1030 mm.
The Plug & Play controllers CSI 464 and CDS 405 are used depending upon the axis drive concept. The controllers in the Desktop housing can be mounted beside the unit as well as under the unit. Optionally the flat bed units can be extended by suitable protection covers and/or machine under frames.
|
all units in mm |
FB2 Stepper |
FB2 Servo |
|
travel feed rate (X/Y/Z) |
80 mm/s |
100 mm/s |
|
gantry clearance |
190 |
190 |
|
drive system |
2-phase stepper motors |
DC servo motors |
|
controlling system |
CSI 464 |
CDS 405 |
|
repeating accuracy |
+/- 0.03 |
+/- 0.02 |
|
resolution |
0.0125 |
0.01 |
|
linear guides |
play-free precision steel shaft guides |
|
|
safety cover |
optional |
optional |
|
drive system |
coordinate table (X/Y) |
travel stroke (X/Y/Z) |
|
stepper / servo |
750 x 850 |
530 x 500 x 160 |
|
stepper / servo |
750 x 1100 |
530 x 750 x 160 |
|
stepper / servo |
1000 x 1350 |
780 x 850 x 160 |
|
stepper / servo |
1250 x 1750 |
1030 x 1250 x 160 |
G-code Technology Ltd.
12 Hadrian Close
St Albans
Hertfordshire AL3 4JY
approximate representation
Product Accessories
4th/5th Axis
Spindles
Also...
Spray Mist
Vacuum Clamping
Tool Length Measurer
Engraving Head
