GFV & GFY cnc milling machines available as 4/5 axis systems

model	MMF
Travel stroke X/Y/Z/C/A	2000/2500/800 mm / ±200°/±95°
Max. travel stroke X/Y/Z	3000/6000/1000 mm
Cube dimension X/Y/Z	1000/1500/650 mm
Travel feed rate	20m/min
Clamping surface (T-nut profile)	1600x1200 mm
Dimensions X/Y/Z	3000/3500/3000 mm
Drive system	AC power amplifier
Control	numCAD CNC
Repeatability accuracy	±0.02mm
Absolute accuracy in the area	±0.05 (Option)
Resolution	0.01mm
Guide system	linear guides
Option	electronic hand wheel, Teach-in application, tactile touch probe

The machine series MMF was developed particularly for the model, prototype and mould making. High structure rigidity was the centre of attention thereby this results from the solid structure:

Steel welded structure of the two long Y gantry axis
Webbed side portals made of aluminium-welded structure
High-load steel profile guides with 8 linear slides per X- and Z-axis
Z-axis centrically mounted on the X-axis

The driven nuts of the ball screw spindles provide quiet running and high procedure dynamics. The assembly is very simple by the freely standing milling table.

Equipped with a rotary swivelling unit as 4th and 5th axis the MMF is suitable optimally for the five-axis-treatment and milling large volume work pieces made of e.g. GFK and CFK. The powerful spindle ES915 with SK30 clamps permits a clamping of tools with a diameter of 20mm.

The carried 5-times tool changer, mounted on the portal can be supplemented optionally by 5 further tool storages.

The combination of functions like e.g. jerk control, speed and acceleration pilot control, Look ahead path control and carrying of tool orientation, permits best technology utilization and adjustment to changing requirements, to speed, accuracy and surface quality.